Understanding the Physiological effect of Audio stimulus on Females using HRV and Cardiac Electrophysiology Analysis

The current study deciphers the effect of an audio stimulus (Indian classical music) on the autonomic nervous system (ANS) and the cardiac electrophysiology of female volunteers. Electrocardiogram (ECG) readings were obtained from ten volunteers for audio stimulus before and after exposing them to the respective stimuli. Various R-R interval (RRI) based analyses (like Recurrence and HRV analysis) were performed to understand the changes in the ANS and the cardiac electrophysiology. HRV analysis indicated an overall parasympathetic dominance after exposure to the audio stimulus

Single-Sensor DCM PFC Based Onboard Chargers for Low Voltage Electric Vehicles

Grid-connected plug-in electric vehicles (PEVs) are considered as one of the most sustainable solutions to substantially reduce both the oil consumption and greenhouse gas emissions. Electric vehicles (EVs) are broadly categorized into low power EVs (48/72 V battery) and high power EVs (450/650 V battery). Low power EVs comprise two-wheelers, three-wheelers (rickshaws), golf carts, intra-logistics equipment and short-range EVs whereas high power EVs consist of passenger cars, trucks and electric buses. Charger, which is a power electronic converter, is an important component of EV infrastructures. These chargers consist of power converters to convert AC voltage (grid) to constant DC voltage (battery). The existing chargers are bulky, have high components’ count, complex control system and poor input power quality. Henceforth, to overcome these drawbacks, this thesis focuses on the onboard charging solutions (two-stage isolated and single-stage non-isolated) for the low voltage battery EVs. Power factor correction (PFC) is the fundamental component in the EV charger. Considering the specific boundaries of the continuous conduction mode (CCM) operation for AC-DC power conversion and their complexity, the proposed chargers are designed to operate in discontinuous conduction mode (DCM) and benefiting from the characteristics like built-in PFC, single sensor, simple control, easy implementation, inherent zero-current turn-on of the switches, and inherent zero diode reverse recovery losses. Proposed converters can operate for the wide input voltage range and the output voltage is controlled by a single sensor-based single voltage control loop making the control simple and easy to implement, and improves the system reliability and robustness. This thesis studies and designs both single-stage non-isolated and two-stage isolated onboard battery chargers to charge a 48 V lead-acid battery pack. At first, a non-isolated single-stage single-cell buck-boost PFC AC-DC converter is studied and analyzed that offers reduced components’ count and is cost-effective, compact in size and illustrates high efficiency. While the DCM operation ensures unity power factor (UPF) operation at AC mains without the use of input voltage and current sensors. However, they employ high current rated semiconductor devices and the use of diode bridge rectifier suffers from higher conduction losses. To overcome these issues, a new front-end bridgeless AC-DC PFC topology is proposed and analyzed. With this new bridgeless front-end topology, the conduction losses are significantly reduced resulting in improved efficiency. The low voltage stress on the semiconductor devices are observed because of the voltage doubler configuration. Later, an isolated two-stage topology is proposed. The previously proposed bridgeless buck-boost derived PFC converter is employed followed by an isolated half-bridge LLC resonant converter. Loss analysis is done to determine optimal DC-link voltage for the efficient operation of the proposed conversion. The converters' steady-state operation, DCM condition, and design equations are reported in detail. The small-signal models for all the proposed topologies using the average current injected equivalent circuit approach are developed, and detailed closed-loop controller design is illustrated. The simulation results from PSIM 11.1 software and the experimental results from proof-of-concept laboratory hardware prototypes are provided in order to validate the reported analysis, design, and performance

Combining Ascochyta blight and Botrytis grey mould resistance in chickpea through interspecific hybridization

Ascochyta blight (AB) caused by Ascochyta rabiei (Pass.) Labr. and Botrytis grey mould (BGM) caused by Botrytis cinerea (Pers. ex Fr.) are important diseases of the aerial plant parts of chickpea in most chickpea growing areas of the world. Although conventional approaches have contributed to reducing disease, the use of new technologies is expected to further reduce losses through these biotic stresses. Reliable screening techniques were developed: ‘field screening technique’ for adult plant screening, ‘cloth chamber technique’ and ‘growth chamber technique’ for the study of races of the pathogen and for segregating generations. Furthermore, the ‘cut twig technique’ for interspecific population for AB and BGM resistance was developed. For introgression of high levels of AB and BGM resistance in cultivated chickpea from wild relatives, accessions of seven annual wild Cicer spp. were evaluated and identified: C. judaicum accessions 185, ILWC 95 and ILWC 61, C. pinnatifidum accessions 188, 199 and ILWC 212 as potential donors. C. pinnatifidum accession188 was crossed with ICCV 96030 and 62 F9 lines resistant to AB and BGM were derived. Of the derived lines, several are being evaluated for agronomic traits and yield parameters while four lines, GL 29029, GL29206, GL29212, GL29081 possessing high degree of resistance were crossed with susceptible high yielding cultivars BG 256 to improve resistance and to undertake molecular studies. Genotyping of F2 populations with SSR markers from the chickpea genome was done to identify markers potentially linked with AB and BGM resistance genes. In preliminary studies, of 120 SSR markers used, six (Ta 2, Ta 110, Ta 139, CaSTMS 7, CaSTMS 24 and Tr 29) were identified with polymorphic bands between resistant derivative lines and the susceptible parent. The study shows that wild species of Cicer are the valuable gene pools of resistance to AB and BGM. The resistant derivative lines generated here can serve as good pre-breeding material and markers identified can assist in marker assisted selection for resistance breeding

Combining Ascochyta blight and Botrytis grey mould resistance in chickpea through interspecific hybridization

Ascochyta blight (AB) caused by Ascochyta rabiei (Pass.) Labr. and Botrytis grey mould (BGM) caused by Botrytis cinerea (Pers. ex Fr.) are important diseases of the aerial plant parts of chickpea in most chickpea growing areas of the world. Although conventional approaches have contributed to reducing disease, the use of new technologies is expected to further reduce losses through these biotic stresses. Reliable screening techniques were developed: ‘field screening technique’ for adult plant screening, ‘cloth chamber technique’ and ‘growth chamber technique’ for the study of races of the pathogen and for segregating generations. Furthermore, the ‘cut twig technique’ for interspecific population for AB and BGM resistance was developed. For introgression of high levels of AB and BGM resistance in cultivated chickpea from wild relatives, accessions of seven annual wild Cicer spp. were evaluated and identified: C. judaicum accessions 185, ILWC 95 and ILWC 61, C. pinnatifidum accessions 188, 199 and ILWC 212 as potential donors. C. pinnatifidum accession188 was crossed with ICCV 96030 and 62 F9 lines resistant to AB and BGM were derived. Of the derived lines, several are being evaluated for agronomic traits and yield parameters while four lines, GL 29029, GL29206, GL29212, GL29081 possessing high degree of resistance were crossed with susceptible high yielding cultivars BG 256 to improve resistance and to undertake molecular studies. Genotyping of F2 populations with SSR markers from the chickpea genome was done to identify markers potentially linked with AB and BGM resistance genes. In preliminary studies, of 120 SSR markers used, six (Ta 2, Ta 110, Ta 139, CaSTMS 7, CaSTMS 24 and Tr 29) were identified with polymorphic bands between resistant derivative lines and the susceptible parent. The study shows that wild species of Cicer are the valuable gene pools of resistance to AB and BGM. The resistant derivative lines generated here can serve as good pre-breeding material and markers identified can assist in marker assisted selection for resistance breeding

The incidence of public spending on healthcare: Comparative evidence from Asia

The article compares the incidence of public healthcare across 11 Asian countries and provinces, testing the dominance of healthcare concentration curves against an equal distribution and Lorenz curves and across countries. The analysis reveals that the distribution of public healthcare is prorich in most developing countries. That distribution is avoidable, but a propoor incidence is easier to realize at higher national incomes. The experiences of Malaysia, Sri Lanka, and Thailand suggest that increasing the incidence of propoor healthcare requires limiting the use of user fees, or protecting the poor effectively from them, and building a wide network of health facilities. Economic growth may not only relax the government budget constraint on propoor policies but also increase propoor incidence indirectly by raising richer individuals' demand for private sector alternatives. © 2007 Oxford University Press.link_to_subscribed_fulltex

Effect of payments for health care on poverty estimates in 11 countries in Asia: an analysis of household survey data

Background: Conventional estimates of poverty do not take account of out-of-pocket payments to finance health care. We aimed to reassess measures of poverty in 11 low-to-middle income countries in Asia by calculating total household resources both with and without out-of-pocket payments for health care. Methods: We obtained data on payments for health care from nationally representative surveys, and subtracted these payments from total household resources. We then calculated the number of individuals with less than the internationally accepted threshold of absolute poverty (US$1 per head per day) after making health payments. We also assessed the effect of health-care payments on the poverty gap-the amount by which household resources fell short of the$1 poverty line in these countries. Findings: Our estimate of the overall prevalence of absolute poverty in these countries was 14% higher than conventional estimates that do not take account of out-of-pocket payments for health care. We calculated that an additional 2·7% of the population under study (78 million people) ended up with less than $1 per day after they had paid for health care. In Bangladesh, China, India, Nepal, and Vietnam, where more than 60$1 per day need to include measures to reduce such payments. © 2006 Elsevier Ltd. All rights reserved.link_to_subscribed_fulltex

Effect of payments for health care on poverty estimates in 11 countries in Asia: an analysis of household survey data

Background: Conventional estimates of poverty do not take account of out-of-pocket payments to finance health care. We aimed to reassess measures of poverty in 11 low-to-middle income countries in Asia by calculating total household resources both with and without out-of-pocket payments for health care. Methods: We obtained data on payments for health care from nationally representative surveys, and subtracted these payments from total household resources. We then calculated the number of individuals with less than the internationally accepted threshold of absolute poverty (US$1 per head per day) after making health payments. We also assessed the effect of health-care payments on the poverty gap-the amount by which household resources fell short of the$1 poverty line in these countries. Findings: Our estimate of the overall prevalence of absolute poverty in these countries was 14% higher than conventional estimates that do not take account of out-of-pocket payments for health care. We calculated that an additional 2·7% of the population under study (78 million people) ended up with less than $1 per day after they had paid for health care. In Bangladesh, China, India, Nepal, and Vietnam, where more than 60$1 per day need to include measures to reduce such payments. © 2006 Elsevier Ltd. All rights reserved.link_to_subscribed_fulltex

Who pays for health care in Asia?

We estimate the distributional incidence of health care financing in 13 Asian territories that account for 55% of the Asian population. In all territories, higher-income households contribute more to the financing of health care. The better-off contribute more as a proportion of ability to pay in most low- and lower-middle-income territories. Health care financing is slightly regressive in three high-income economies with universal social insurance. Direct taxation is the most progressive source of finance and is most so in poorer economies. In universal systems, social insurance is proportional to regressive. In high-income economies, the out-of-pocket (OOP) payments are proportional or regressive while in low-income economies the better-off spend relatively more OOP. But in most low-/middle-income countries, the better-off not only pay more, they also get more health care. © 2007 Elsevier B.V. All rights reserved.link_to_subscribed_fulltex

Who pays for health care in Asia?

We estimate the distributional incidence of health care financing in 13 Asian territories that account for 55% of the Asian population. In all territories, higher-income households contribute more to the financing of health care. The better-off contribute more as a proportion of ability to pay in most low- and lower-middle-income territories. Health care financing is slightly regressive in three high-income economies with universal social insurance. Direct taxation is the most progressive source of finance and is most so in poorer economies. In universal systems, social insurance is proportional to regressive. In high-income economies, the out-of-pocket (OOP) payments are proportional or regressive while in low-income economies the better-off spend relatively more OOP. But in most low-/middle-income countries, the better-off not only pay more, they also get more health care

Who pays for health care in Asia?

We estimate the distributional incidence of health care financing in 13 Asian territories that account for 55% of the Asian population. In all territories, higher-income households contribute more to the financing of health care. The better-off contribute more as a proportion of ability to pay in most low- and lower-middle-income territories. Health care financing is slightly regressive in three high-income economies with universal social insurance. Direct taxation is the most progressive source of finance and is most so in poorer economies. In universal systems, social insurance is proportional to regressive. In high-income economies, the out-of-pocket (OOP) payments are proportional or regressive while in low-income economies the better-off spend relatively more OOP. But in most low-/middle-income countries, the better-off not only pay more, they also get more health care.